AB diamond tools, industrial diamonds and dies
 

The polycrystalline black diamond transformed by the explosion procedure is a very popular abrasive product used for lapping and polishing of various materials. But only goods of high quality justify the use of the pure diamond powder whereas large surfaces or materials of less quality need another economical application that can be fulfilled by using the diamond paste.

The diamond polishing of compression moulds for synthetic articles, for instance, is a long lasting and laborious work due to the complicated shapes that can be reduced by using the polycrystalline diamond paste.

Sizes and packaging:

  Standard grain sizes   Pastes: Suspensions:
0,25 µm 9 µm   Syringes Packing drum
1 µm 15 µm   5 g 100 ml
3 µm 30 µm   10 g 500 ml
6 µm 50 µm   20 g 1000 ml
    Other sizes are available on request.

Pastes and suspensions are based on oil and water soluble foundations

We recommend our dilution products for diamond pastes as following:

Type W = water soluble
Type O = oil soluble

<<< back to product overview

  

For diamond polishing works the black polycrystalline diamond is most recommendable.

The polycrystalline diamond allows grain steps from 5:1 in successive working cycles! That means a direct step from 30 µm to 6 µm, for example.

Our standard grain sizes are graduated accordingly, so that treatment grooves or scratches can be easily removed by using the 2 steps finer grain paste.